Please note that his unit has been designed to run during daylight hours. Cabling and accessories will be sized on request here.
This kit consists of the following components
1 x Shurflo 9325-043-101 24V Submersible DC Pump
SHURflo's 9300 series pump offers a solution to your remote water needs. It's rugged, durable and built to last. This pump delivers a steady 1.0 GPM operation at 100 PSI maximum at 70.1 m. It incorporates a unique waterblocked cable connector that is impervious to water leakage and condensation problems preventing waterwicking. Great for applications in livestock watering, irrigation, ponds, islands, remote homes and cabins.
Technical Specifications
• Max. Flow (LPH): 300.
• Amps: 4.6.
• Volts: 24.
• Max. Suction Lift (m.): 70m.
• Discharge Port (in.): 1/2" hose barb.
• Pump Housing: Stainless steel fasteners.
• Dimensions L x W x H: 96mm x 96mm x 305mm.
2 x Renewsys Deserv 80W Solar Panel
The Renewsys family of poly-crystalline cut cells PV modules comes with power ratings ranging from 5 Wp to 125Wp. These modules use high performance poly crystalline cut cells and are designed for grid connects as well as off-grid applications. Other custom modules can also be configured.
Technical Specifications
Electrical Characteristics
• Peak Power, Pmax (W p) - 80W.
• Open circuit voltage, Voe (V) - 21.82V.
• Short Circuit current, lsc (A) - 4.79V.
• Voltage at Maximum power, Vmp (V) - 17.82V
• Current a t Maximum power, Imp (A) - 4.50A.
• Module Efficiency (%) - 14.50%.
Mechanical Parameters
• Module dimension (nm) - 837mm x 659mm x 34mm.
• Matrix (nm) - 9 x 4.
• Solar cell Type (nm) - Multi crystalline cells.
• Front Cover (nm) - 3.2mm Thick Low iron tempered glass.
• Frame Material (mm) - Silver Anodized Aluminium Alloy.
• Junction Box (nm) - 3 Rail.
Shurflo 24V DC Pump Controller 902-100 LCB-GO
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
Technical Specifications
• Maximum power output: 150W
• Over temperature shutdown: 80ºC.
• Ambient temperature: -10ºC to 45ºC.
• Max. Array Input Voltage: 45V.
• Min. Startup Voltage: 25V.
• Shutdown Voltage: 28V.
• Max. Output Current: 5 Amps.