Features
- Holds objects 1" to 2.25" (25 to 57mm) in diameter.
- Each clamp supports a safe working load of 25lbs (11 kilos).
- 2 clamps support 50lbs (23 kilos).
- Mounts easily with one #10 bolt or screw.
- Mounting area: 2 1/2" x 3/4" (64x19mm).
Instructions
A new QUICK FIST clamp fresh out of the mould can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the QUICK FIST clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
- Use #10 bolt or screw to fasten. Do not over tighten.
- QUICK FIST can be mounted with the strap facing in any direction.
- To Clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness and repeat.
- For certain applications, like roof racks with round tubing, you can install the QUICK FIST clamps using hose clamps. Make sure you centre the hose clamp on the plastic washer to avoid cutting into the rubber clamp.
- For small diameter objects: push jaw without strap down inside other jaw and tighten strap on top of jaw.
- QUICK FIST can also be used as a pipe stand-off (particularly suited for marine applications). Do not use on exhaust pipes.
Important:
All solar products, power systems, water heating and gas products and their components must be installed by appropriately qualified personnel. All installations must adhere to local wiring regulations and standards. Sustainable Online will not be held liable for any product malfunctions as a result of incorrectly installed systems.