Please note that this product is available on a 1-2 week lead time.
Some battery combiners (also called voltage-controlled relay, or split charge relay) will disconnect a battery in case of a short but high amperage load. A battery combiner also may fail to connect a large but discharged battery bank because the DC voltage immediately drops below the disengage value once the batteries are connected. The software of the Cyrix-ct 12/24 does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix-ct 12/24 looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period. The time delay depends on the voltage deviation from the trend.
Features
- Long bolts to allow connection of more than one power cable.
- Protection against overheating (due to a long duration overload e.g.)
- LED status indication (Cyrix 12/24 230 only).
- 12/24 V auto ranging.
- No voltage loss.
- Prioritising the starter battery.
- Bidirectional voltage sensing and power supply from both batteries.
- Parallel connection in case of emergency (Start Assist).
Technical Specifications
- LED status indication: No.
- Continuous current: 120 A.
- Cranking rating (5 seconds): 180 A.
- Connect voltage: From 13 V to 13,8 V and 26 to 27,6 V with intelligent trend detection.
- Disconnect voltage: From 11 V to 12,8 V and 22 to 25,7 V with intelligent trend detection.
- Current consumption when open: <4 mA.
- Current consumption when closed: 12 V: 220 mA 24 V: 120 mA.
- Start Assist: Yes (Cyrix remains engaged for 30 seconds).
- Control cable included (length 1 m): No.
- Protection category: IP54.
- Weight kg: 0,11.
- 5 year warranty.
-
- Dimensions (h x w x d in mm): 46 x 46 x 80.
Important:
All solar products, power systems, water heating and gas products and their components must be installed by appropriately qualified personnel. All installations must adhere to local wiring regulations and standards. Sustainable Online will not be held liable for any product malfunctions as a result of incorrectly installed systems.
