Sustainable Solar Powered Submersible Pump Kit

Please note that his unit has been designed to run during daylight hours. Cabling and accessories will be sized on request here.

This kit consists of the following components
1 x Shurflo 9325-043-101 24V Submersible DC Pump
SHURflo's 9300 series pump offers a solution to your remote water needs. It's rugged, durable and built to last. This pump delivers a steady 1.0 GPM operation at 100 PSI maximum at 70.1 m. It incorporates a unique waterblocked cable connector that is impervious to water leakage and condensation problems preventing waterwicking. Great for applications in livestock watering, irrigation, ponds, islands, remote homes and cabins.

Technical Specifications
• Max. Flow (LPH): 300.
• Amps: 4.6.
• Volts: 24.
• Max. Suction Lift (m.): 70m.
• Discharge Port (in.): 1/2" hose barb.
• Pump Housing: Stainless steel fasteners.
• Dimensions L x W x H: 96mm x 96mm x 305mm.

2 x Renewsys Deserv 80W Solar Panel
The Renewsys family of poly-crystalline cut cells PV modules comes with power ratings ranging from 5 Wp to 125Wp. These modules use high performance poly crystalline cut cells and are designed for grid connects as well as off-grid applications. Other custom modules can also be configured.

Technical Specifications
Electrical Characteristics
• Peak Power, Pmax (W p) - 80W.
• Open circuit voltage, Voe (V) - 21.82V.
• Short Circuit current, lsc (A) - 4.79V.
• Voltage at Maximum power, Vmp (V) - 17.82V
• Current a t Maximum power, Imp (A) - 4.50A.
• Module Efficiency (%) - 14.50%.

Mechanical Parameters
• Module dimension (nm) - 837mm x 659mm x 34mm.
• Matrix (nm) - 9 x 4.
• Solar cell Type (nm) - Multi crystalline cells.
• Front Cover (nm) - 3.2mm Thick Low iron tempered glass.
• Frame Material (mm) - Silver Anodized Aluminium Alloy.
• Junction Box (nm) - 3 Rail.

Shurflo 24V DC Pump Controller 902-100 LCB-GO
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.

Technical Specifications
• Maximum power output: 150W
• Over temperature shutdown: 80ºC.
• Ambient temperature: -10ºC to 45ºC.
• Max. Array Input Voltage: 45V.
• Min. Startup Voltage: 25V.
• Shutdown Voltage: 28V.
• Max. Output Current: 5 Amps.