* 1 x 2m length of Sustainable 6mm² Red Panelflex Solar Power System Accessories
The standard backup battery on the motor is replaced with the battery included in this unit.
SDDirectPro EnerSol 100 - 100W Solar Panel
EnerSol modules achieve or exceed their nominal power. The guarantee you get more than what you pay for! EnerSol SD Direct Pro is specifically designed for use in remote areas.
* Cell: Polycrystalline solar cell 156 x 128mm.
* No. of Cells (Connections):36(6x6)
* Panel Dimensions: 1120 x 670 x 35mm.
* Weight: 10.0kg.
* Connectors and Cables: Available upon request.
SonX : RA12 100Ah - 12V AGM Deep Cycle : Solar Storage Batteries
Technical Specification :
Cells Per Unit : 6
Voltage Per Unit : 12V
Capacity : 100Ah@10hr-rate to 1.80V per cell @ 25 degrees C
Weight : Approx. 30.0 Kg
Max. Discharge Current : 1000A (5 sec)
Internal Resistance : Approx. 5m ohms
Operating Temperature Range :
Discharge : -20 degrees C ~ 60 degrees C
Charge : 0 degrees C ~ 50 degrees C
Storage : -20 degrees C ~ 60 degrees C
Normal Operating Temperature Range : 25 degrees C +/- 5 degrees C
Float charging Voltage : 13.6 to 13.8 VDC / unit Average at 25 degrees C
Recommended Maximum Charging Current Limit : 30A
Equalization and Cycle Service : 14.6 to 14.8 VDC / unit Average at 25 degrees C
Self Discharge : VRLA batteries can be stored for more than 6 months at 25 degrees C. Self-discharging ratio less than 3% per month at 25 degrees C. Please charge batteries before using.
Terminal : Terminal F5/F12
Container Material : A.B.S. (UL94-HB), Flammability resistance of UL94-V1 can be available upon request.
Dimensions ( L x W x H ) : 32,8 x 17,2 x 22,2 cm
Weight : Approx. 30kg
Victron : Blue Solar PWM 12/24V - 10A : Solar Charge Controller
The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors. Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.
Low cost PWM controller
Internal temperature sensor
Three stage battery charging (bulk, absorption, float)
Protected against over current
Protected against short circuit
Protected against reverse polarity connection of the solar panels and/or battery
With low voltage load disconnect output
Optional remote display (20A model only)
Sustainable : Pole Mounted Solar Panel Bracket and Battery Box : Solar Power System Accessories
Galvanized pole mounting solar panel bracket and insulated battery box with a lockable lid and a pole mounting bracket. Suitable for a 102Ah battery and a panel of up
to 75W. Fits onto a 50mm pole.
Solar Panel Bracket Pole Mount
* Maximum panel size: Up to 75W Module
* Dimensions: 90 x 65 x 32cm
* Weight 4,4kg
Battery Box Pole Mount
* Maximum Battery size: 102Ah Battery
* Dimensions: 30x 56 x 41cm
* Weight 7,8kg
These prices are subject to change without prior notice, stock availability subject to prior sales. Prices exclude delivery.
|Disclaimer||Please note that stock availability is subject to prior sales. Prices exclude delivery. The image serves as an example of what the product looks like and may differ slightly in appearance.|
|Guarantee/ Warranty||12 month product warranty|