You have no items to compare.
Sustainable.co.za has taken all the complications out of purchasing a fully functional solar power system for your home or office. We have used our extensive knowledge, expertise and experience within the solar power industry and created solar power kits made up of the essential components required to get solar power working in your home.
Solar Power Kit Two is made up of the following components:
1 x Solaire : SDT - 500 - 40W : Solar Panel
Solaire's Polycrystalline technology modules are the most efficient modules in the world (best Wp/sqm ratio).
High yield modules (minimum of 130 Wp/sqm) guarantee an optimized space occupation (2 ha for a 1 MWp project) unlike other photovoltaic technologies such as Thin Film modules which have a lower yield (up to 3,5 ha for a 1 MWp project) and are compounded of heavy metals.
The Solaire Module technology is recognized as a stable, established product and represents 90% of the worldwide market.The manufacturer guarantees an optimum performance of up to 80% over a 25 year period with the panels boasting a life time of over 30 years.
*Dimensions in mm (LxWxH): 660 x 550 x 36
*Power Class: 40Wp
*Power Tolerance: +5/- 2W
*Min Power: 38Wp
*Voltage at Max Power (Vmp): 17.1V
*Current at Max Power (Imp): 2.34A
*Open circuit Voltage (Voc): 21.5V
*Short Circuit Current (Isc): 2.53A
*Maximum System Voltage: 1000V
1 x Excis Batteries : SMF035 - 35Ah : Solar Storage Batteries
Maintenance free, factory sealed - never add water!
Exceptional high rate performance. Over sized inter cell connector surface. Robust polypropylene ribbed container ensures increased impact strength. Spill resistant double lid. Central venting system with flashback arrestor for increased safety. State of Charge (SOC) indicator for ease of stock holding and maintenance .
Salient Design Features
LONG FLOAT LIFE: Calcium alloy grids and plates to minimise corrosion.
Envelope separators to eliminate internal short circuits.
HIGH CYCLING DESIGN: High density active material formulation.
Glass matt backed separators for active material retention
EXCEPTIONAL HIGH RATE PERFORMANCE : Oversized internal inter-cell connector cross section
ENHANCED SAFETY : Central venting system.Flashback arrestor.
High impact strength container.
EASY TO CONNECT : Available with stud or taper terminals.
EASY TO MAINTAIN : Built in State of Charge Indicator.
Capacity at 20hrs: 35
Dimensions (LxWxH): 187 x 127 x 200
Height (including terminal): 220
1 x Omnipower : HT-E-150 Modified Sinewave Inverter : Solar Inverter
The OMNIPOWER HT-E Series modified sinewave Inverters are suitable for most loads and provide an economical way to get instant AC power anywhere and at anytime as long as a battery is handy.
The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power.
The range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance.
The inverter has a robust design and is quiet and portable. It can therefore be operated in almost any environment. The unit has a high current start up capability, protected against short circuit, reverse polarity and over load.
Lights, computerised instruments, emergency power, computers, TV sets, radios, satellite receivers, etc.
Available in 12 & 24 V
Modified sine wave output
Reverse polarity protection - if polarity is reversed the "crowbar circuit" will activate to protect the inverter from further damage. Reverse polarity is not covered under the warranty.
Temperature protection : 50+ / -5 degrees Overload & input low voltage protection
Low battery shutdown
1 x Steca : Solsum 6.6F : Solar Charge Controller
The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W.The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection ofsolar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller.
Automatic detection of voltage
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Common positive grounding or negative grounding on one terminal
Monthly maintenance charge
Electronic protection functions:
Deep discharge protection
Reverse polarity protection of load, module and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overheating overload protection
Battery overvoltage shutdown
Solar Power Kit Two Accessories
This includes all necessary cabling, roof mounts etc. to connect your system up.
These prices are subject to change without prior notice, stock availability subject to prior sales. Prices exclude delivery.