You have no items to compare.
Sustainable.co.za has taken all the complications out of purchasing a fully functional solar power system for your home or office. We have used our extensive knowledge, expertise and experience within the solar power industry and created solar power kits made up of the essential components required to get solar power working in your home.
Solar Power Kit Nine is made up of the following components:
4 x Solaire : SDT - 1000 - 100W : Solar Panels (connected in series)
Solaire's Polycrystalline technology modules are the most efficient modules in the world (best Wp/sqm ratio).
High yield modules (minimum of 130 Wp/sqm) guarantee an optimized space occupation (2 ha for a 1 MWp project) unlike other photovoltaic technologies such as Thin Film modules which have a lower yield (up to 3,5 ha for a 1 MWp project) and are compounded of heavy metals.
The Solaire Module technology is recognized as a stable, established product and represents 90% of the worldwide market.The manufacturer guarantees an optimum performance of up to 80% over a 25 year period with the panels boasting a life time of over 30 years.
Power Tolerance: +3/-3W
Min Power(Wp): 97
Voltage at Max Power (Vmp): 17.2V
Current at Max Power (Imp): 5.8A
Open Circuit Voltage (voc): 21.6V
Short Circuit Current (Isc): 6.6A
Maximum System Voltage: 1000V
4 x Excis Batteries : SMF100 - 102Ah : Solar Storage Batteries (connected in series and parallel - 24V System)
Maintenance free, factory sealed - never add water!
Exceptional high rate performance. Over sized inter cell connector surface. Robust polypropylene ribbed container ensures increased impact strength. Spill resistant double lid. Central venting system with flashback arrestor for increased safety. State of Charge (SOC) indicator for ease of stock holding and maintenance .
Salient Design Features
LONG FLOAT LIFE: Calcium alloy grids and plates to minimise corrosion.
Envelope separators to eliminate internal short circuits.
HIGH CYCLING DESIGN: High density active material formulation.
Glass matt backed separators for active material retention
EXCEPTIONAL HIGH RATE PERFORMANCE : Oversized internal inter-cell connector cross section
ENHANCED SAFETY : Central venting system.Flashback arrestor.
High impact strength container.
EASY TO CONNECT : Available with stud or taper terminals.
EASY TO MAINTAIN : Built in State of Charge Indicator.
Capacity at 20hrs: 102
Dimensions (LxWxH): 328 x 171 x 219
Height (including terminal): 239
1 x Cotek : 600W Inverter S600 - Pure Sinewave 24V : Solar Inverters
PWM High Frequency Pure Sinewave Inverter provides an economical way to get instant AC power anywhere and at anytime as long as a battery is handy. The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power.
The inverter range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance. The inverter has a robust design and is quiet and portable. It can therefore be operated in almost any environment.
Applications: Lights, drills, general electrical tools, computerised instruments, medical equipment, emergency power, computers, TV sets, radios, satellite receivers, fans, small water pumps, etc.
1 x Microcare : MPPT 10 Amp : Solar Charge Controller
The MICROCARE MPPT REGULATOR is designed to interface between the solar panel, the batteries and the load. The tracker will always find the optimum power point of the solar panel system to ensure that maximum power is extracted from the solar panel and put into the batteries.
Using this system up to 30% more power can be extracted from the solar panel than using shunt or series pass regulators. The regulator is also able to charge batteries of a lower voltage than the solar panel. By means of LEDS it will show the status of the system. It also incorporates various charge modes which will automatically increase the charge level to the batteries when first starting up or if the battery voltage falls below the min volts. The regulator will read the nominal battery voltage. This unit is designed to run on a 12/24 volt battery set. It will then read the solar panel voltage and automatically find the optimum power point. The charging , battery values and boost modes are then automatically adjusted.
Via links the load voltage disconnect can be selected, whether the battery is lead acid or sealed, and whether the unit operates as a normal load shedder or as a day/night switch.
Solar Power Kit Nine Accessories
This includes all necessary cabling, roof mounts etc. to connect your system up.
These prices are subject to change without prior notice, stock availability subject to prior sales. Prices exclude delivery.